So how to mix HCG injections for weight loss?
First, you need to determine which dose is right for you. The recommended dosage mentioned in Kevin Trudeau’s book “The Weight Loss Cure They Don’t Want you to Know About” is 175-200 IU, which is different from that from the original 125 IU recommended by Dr. Simeons, because our bodies are much more toxic today according to Kevin Trudeau. However, more is not necessarily better. You need to consider how toxic your body is. (Read Determine the Right HCG Dosage here).
Once you determine the right HCG dosage and desired shot amount for your HCG weight loss, you need to calculate the amount of Bacteriostatic water needed for HCG mixing. (Download a copy of HCG Mixing Calculator here).
In order to mix the HCG injections, you will need HCG in powder concentrate, Bacteriostatic water that is injection safe, syringes for mixing, needles, alcohol pads, and a sterile glass vial. The powder concentrate includes an ampoule of liquid sterile water to be mixed with it, however, this amount is not sufficient for the hCG weight loss shots and should be discarded. It is very important not to mix two kinds of liquids with the HCG; the liquid should always be from the same source. An entirely new, larger vial of injection safe sterile water is required.
Always make sure you let the air out of the syringe before using otherwise it will shoot back out. Just put the point of the needle in far enough to be in the liquid. Then draw back VERY SLOWLY. At the end, you may need to tilt the ampoule to get the very last drops.
When mixing, the most important thing is making sure everything is clean and sterile. Clean your work area with bleach before hand and that your hands and feet have been sterilized. Let’s take mixing 200 IU HCG shots with a 5000 IU ampoule for example. The needle that is used in the first step is a 30 cc syringe, and the needle must not touch the vial, if it does then the needle should be replaced before moving forward. When mixing, do NOT shake the vial, carefully swirl it. At the end of the mixing, a 3cc syringe is used. Watch a video about HCG Mixing Instructions here.
Take out 25 cc of sterile water using a sterile needle, be sure to use an alcohol pad to clean the needle and bottle before hand, after that, replace the needle with a new sterile needle. Inject 1 cc of water and the HCG powder into the ampoule. Swirl the vial gently to mix the HCG, which should dissolve right away.
The remaining 24 cc of sterile water should be injected into a sterile glass vial. From there, take out 1 cc of HCG and inject it into the glass vial containing the 24 cc of water, make sure the glass vile has been sterilized. There should be 25 doses of 200 IU (1 ml) doses ready for injection.
To sum up, here’s the mixing procedure for 200 IU INJECTIONS WITH A 5000 IU AMPOULE OF HCG:
• Swab the top of the 30cc Bacteriostatic water vial with rubbing alcohol and the top of a new sterile GLASS vial with rubbing alcohol (using a new swab for the Glass vial).
• Using a 30cc syringe – draw out 25cc of Bac-water.
• Inject 1cc into HCG ampoule to mix HCG powder (slowly down the side) DO NOT let the needle touch anything, even the HCG ampoule. If it does, replace the needle before the next step.
• Inject the remaining 24cc of Bac-water into the new Glass vial.
• Swish the liquid slowly in the HCG ampoule until it is all dissolved (never shake it).
• Draw out the 1cc of liquid HCG.
• Swab the Glass vial again and inject the HCG into the sterile Glass vial containing the 24 cc. of Bac-water.
• Now you have 25 doses of 200 IU at 1 ml each. 1 ml. = 1 cc.
Mixing procedure for 175 IU INJECTIONS WITH A 5000 IU AMPOULE OF PREGNYL:
The mixing procedure is exactly the same as the 200 IU procedure EXCEPT you would draw out 28.5 cc. of Bac-water instead of 25 cc. Now you have 28 doses of 175 IU at 1 ml each. 1 ml. = 1 cc.
Mixing procedure for 200 IU INJECTIONS WITH A 1500 IU AMPOULE OF HCG:
The mixing procedure is exactly the same as the above procedure EXCEPT you would draw out 7.5cc of bac-water instead of 25cc. Now you have 7 doses of 200 IU at 1 ml each. 1 ml. = 1 cc.
Mixing procedure for 175 IU INJECTIONS WITH A 1500 IU AMPOULE OF HCG:
The mixing procedure is exactly the same as the above procedure EXCEPT you would draw out 8.5 cc. of bac-water instead of 25 cc. Now you have 8 doses of 175 IU at 1 ml each. 1 ml. = 1 cc.